Home
Product Directory
Electrical & Electronics
Telecommunication & Broadcasting
Other Communication Products
Optical Link Multi Channel Protection Switch
| FOB Price: | US$50.00-500.00 / Piece |
|---|---|
| Min. Order: | 1 Piece |
| Min. Order | FOB Price |
|---|---|
| 1 Piece | US$50.00-500.00/ Piece |
| Port: | Shenzhen, China |
|---|---|
| Production Capacity: | 1000/Month |
| Payment Terms: | L/C, T/T, Western Union |
Product Description
Company Info
Product Description
Optical Link Protection Switch
Link protection is designed to safeguard networks from failure. Failures in high-speed networks have always been a concern of utmost importance. A single fiber cut can lead to heavy losses of traffic and protection-switching techniques have been used as the key source to ensure survivability in such networks.
Protection architectures like Path protection and Link protection safeguard the above-mentioned networks from different kinds of failures. In path protection, a backup path is used from the source to its destination to bypass the failure. In Link protection, the end nodes of the failed link initiate the protection. These nodes detect the fault and are responsible to initiate the protection mechanisms in order to detour the affected traffic from the failed link onto predetermined reserved paths. Other types of protection are channel-, segment- and p-cycle protection.
Optical link protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user. In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be reverted or Non-reverted modes. Under Reverted mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-reverted mode, the system does not switch back.
Equipment Performance
Ordering Information
CONFIGURATION
iPhotonics' Link protection switch minimal configuration includes: 1 pc of AC power line, 1 pair of lugs, 1 set of Equipment
Link protection is designed to safeguard networks from failure. Failures in high-speed networks have always been a concern of utmost importance. A single fiber cut can lead to heavy losses of traffic and protection-switching techniques have been used as the key source to ensure survivability in such networks.
Protection architectures like Path protection and Link protection safeguard the above-mentioned networks from different kinds of failures. In path protection, a backup path is used from the source to its destination to bypass the failure. In Link protection, the end nodes of the failed link initiate the protection. These nodes detect the fault and are responsible to initiate the protection mechanisms in order to detour the affected traffic from the failed link onto predetermined reserved paths. Other types of protection are channel-, segment- and p-cycle protection.
Optical link protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user. In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be reverted or Non-reverted modes. Under Reverted mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-reverted mode, the system does not switch back.
Equipment Performance
| Parameters | Unit | 1:1 | 1+1 | 1-1 |
| Wavelength | nm | 1310±50nm & 1550±50nm | ||
| Optical Power Range | dBm | +23~-50 | ||
| Optical Power Accuracy | dBm | ±0.25 | ||
| Optical Power Resolution | dB | ±0.01 | ||
| Return Loss | dB | ≥55 | ||
| PDL | dB | ≤0.05 | ||
| WDL | dB | ≤0.1 | ||
| Insertion Loss | dB | TX<1.2/RX<1.2 | TX<4/RX<1.2 | <1.2 |
| Switching Time | ms | <35 | <15 | <15 |
| Switching Lifetime | cycles | >107 | ||
| Operation Temperature | ºC | -10~+60°C | ||
| Storage Temperature | ºC | -20~+75°C | ||
| Power Supply | V | DC(36-72)V & AC(85-264)V/50~60Hz | ||
| Power-off Situations | Keep or switch to the secondary path | |||
| Connectors | SC/PC | |||
| Dimensions | 19' 1U/4U | |||
Ordering Information
| Dimensions | Wavelength | Type | - | Communication Interface | Power Supply | Fiber Type | Connector | |
| OLP | 1: 1U | 3: SM 13/15nm | 1: 1+1 | 2:RS232 | 2: AC85~265V | 1: 9/125 | 1:SC/PC | |
| 5: Plug-in Card | 2: 1:1A | 3:RJ45 | 3: DC36~72V | 2:SC/APC | ||||
| X: Others | 3: 1-1 | 4:RS232/RJ45 | 4: Dual AC | |||||
| 4: BIDI WDM | 5:RS485 | 5: Dual DC | ||||||
| 5: BIDI CWDM | 6:RS485/RJ45 | 6: AC & DC | ||||||
| 6: PON 1-1 | X: Others | X: Others | ||||||
| 7: N:1 |
CONFIGURATION
iPhotonics' Link protection switch minimal configuration includes: 1 pc of AC power line, 1 pair of lugs, 1 set of Equipment
Address:
3/F Building 4, Guorun Ind. Park, Gongye East Road, Longhua, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics, Electrical & Electronics
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
IPhotonics Creation Co., Ltd is a professional manufacturer in optical components & instuments, we set up company in Shenzhen and establish mass production lines in Dongguan.
IPhotonics owns a group of top-talent team with rich product R&D experience and strong innovation ability, very solid technology on R&D, and advanced production testing and sealing equipment for optical communication products such as MTP/MPO, PLC splitter, DWDM, Optical Switch and etc.
IPhotonics is always devoted to providing high quality & most competitive products and satisfactory after-sale service for worldwide fast growing FTTH market. Our products have been exported to UAS, Europe, Latin America and etc., we are pride to be vendor to some foreign telecom and data centers, famous companies, we understand well and persist in our way to create value for customers before we get reward.
We are convinced that path to success is through excellence and customer service. Our customers are our number one priority. We know you have many choices of where to buy, so we do our best to provide the best products, at the best prices with the best possible support.
We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
IPhotonics owns a group of top-talent team with rich product R&D experience and strong innovation ability, very solid technology on R&D, and advanced production testing and sealing equipment for optical communication products such as MTP/MPO, PLC splitter, DWDM, Optical Switch and etc.
IPhotonics is always devoted to providing high quality & most competitive products and satisfactory after-sale service for worldwide fast growing FTTH market. Our products have been exported to UAS, Europe, Latin America and etc., we are pride to be vendor to some foreign telecom and data centers, famous companies, we understand well and persist in our way to create value for customers before we get reward.
We are convinced that path to success is through excellence and customer service. Our customers are our number one priority. We know you have many choices of where to buy, so we do our best to provide the best products, at the best prices with the best possible support.
We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
